JK AUDIO
JK Audio THAT-2 Telephone Handset Audio Tap
JK Audio THAT-2 Telephone Handset Audio Tap
No se pudo cargar la disponibilidad de retiro
JK Audio THAT-2 Telephone Handset Audio Tap
Tap Your Phone with XLR Jacks.
Connect THAT-2 between your telephone and handset for quick access to audio in and out of the telephone. The THAT-2 is used by radio stations to record and play sound bytes, and by TV and film sound crews to get IFB dialog over phone lines.
Record and Play Audio Clips
Simply unplug the handset coily cord form the base of your telephone and plug it directly into the THAT-2. Then, using the supplied cable, connect the THAT-2 back to the telephone. Now connect your audio equipment or powered speaker to the RCA or XLR jacks. The grey pushbutton selects which audio will be sent into the telephone (Out = talking on the handset, In = sending audio in through the RCA jack). The output jacks contains a nice mix of the audio from both sides of the conversation, as well as the tones being pressed on the keypad.
Phone Compatibility
The THAT-2 has a three-position switch which accommodates electret, dynamic and carbon telephone handset microphone types. The THAT-2 will emulate the type of microphone that is in the handset and allow you to send audio into many different types of analog and digital PBX sets, as well as ISDN telephones. THAT-2 does not work with cordless or cell phones, or any telephone with a keypad in the handset.
