Have a remote guest you want to interview? Simply connect your phone to the RØDECaster Pro via Bluetooth™ or with a TRRS cable. The RØDECaster Pro automatically provides “mix-minus” audio to prevent echo being heard by the caller, without the need to purchase dedicated and costly hardware. Telephone interviews with a remote guest never sounded so good!
Sound like a million dollars
Class A Servo-biased Preamps
The RØDECaster Pro’s pristine preamps and outputs feature Class A circuitry, as found in broadcast consoles that cost hundreds of thousands of dollars. The Class A preamps provide a much cleaner gain structure with lower levels of distortion. The result is an incredibly clean, low-noise signal. The Preamps are also servo-biased, keeping distortion levels low. Your signal is broadcast-pure.
APHEX® On board
Your pristine signal can also be enhanced with the legendary patented audio processors, APHEX Aural Exciter™ and APHEX Big Bottom™. These have been incorporated in the audio processing section of the RØDECaster Pro, and your sound will have that rich, warm tone only found in professional studios. The RØDECaster Pro also features multistage dynamics, such as compression, limiting, de-essing and noise-gating.
The RØDECaster Pro operates as a standalone unit straight out of the box, recording your finished podcast direct to a microSD™ card. The RØDECaster Pro also connects to your computer as a USB audio interface, so you can record your podcast to your favourite recording software, or stream live. Multitrack recording is also available via USB to your computer’s recording software (including Garage Band, Reaper, Logic, ProTools, Audition and more), allowing you to separately record each of the sources to its own track for editing in post-production. Naturally, a stereo mix of your finished podcast will also be captured in multi-channel mode.
RØDECaster Pro Specifications
ACOUSTIC & ELECTRICAL SPECIFICATION
Mic Inputs:20 Hz – 20 kHz, -3dB at 20 Hz (high-pass filter)
Monitor Outputs:20 Hz – 20 kHz better than ±0.5dB
600Ω (Mic Preamplifiers)
–125dBA (A-Weighted, measured as per IEC651)
Maximum Output Level
+3dBu (Monitor Outputs)
Headphone Output Power
Max output power at 1% THD: 32Ω –> 220mW | 300Ω –> 31mW
100 dBA (Mic Preamplifiers)
0dB – 55dB (Mic Preamplifiers)
External DC power supply 12 - 15v DC, 1A
USB-C, 1/4” Balanced TRS STEREO (Monitor Outputs)
microSD™ card slot, 512MB internal memory for storing sounds for programmable pads
Dimensions (L x W x H, mm)
350 x 275 x 82
Package Dimensions (L x W x H, mm)
412 x 338 x 127